Minimodule Isa Expansion Board Features; Specifications; Physical Specifications; Power Requirements - Ampro ReadyBoar 800 Reference Manual

Appendix B

MiniModule ISA Expansion Board Features

• Supports PC/104 Bus and PC/104-Plus Bus expansion interfaces
• Supports ISA bus signals through PCI-104 connector
• Transparent to the Operating System
• Supports PC/104-Plus form factor 90x96mm (3.6x3.8")
PCI-to-ISA Bridge Controller:
• PCI 2.1 compliant
• Transparent mode
• Full 24-bit ISA addressing
• 16-bit and 8-bit I/O and memory cycles
• Software transparent DMA
• ISA bus master supports (4) PC/104 cards
• Encodes all ISA IRQs

Specifications

Physical Specifications

Table B-1 lists the physical dimensions of the board. Figures B-2 and B-3 give the typical mounting
order in side views.
Table B-1. MiniModule ISA Weight and Footprint Dimensions
Item
Weight
Height (overall)
Width
Length
Thickness

Power Requirements

The MiniModule ISA expansion board draws its power from the ReadyBoard 800 through the PCI-104
bus connector.

Environmental Specifications

Table B-2 provides the most efficient operating and storage condition ranges required for this board.
Table B-2. MiniModule ISA Environmental Requirements
Temperature
Humidity
76
Dimension
0.027kg. (0.06lb)
11.07mm (0.436")
90mm (3.6")
96mm (3.8")
1.574mm (0.062")
Parameters
Operating
Storage
Operating
Non-operating
Reference Manual
NOTE
Overall height is measured from the
upper board surface to the highest
permanent component (PC/104 bus
connector) on the upper board
surface.
Conditions
+0°to+60°C (32°to+140°F)
–20°to+75°C (–4°to+167°F)
20% to 80% relative humidity,
non-condensing
5% to 95% relative humidity,
non-condensing
MiniModule ISA Board
ReadyBoard 800