Ampro ReadyBoar 800 Reference Manual page 9

Chapter 1
Other ReadyBoard Products
• ReadyBoard 550 – This EPIC single board computer (SBC) used for high volume embedded
applications provides designers with a low cost, low-power choice of high performance processors
with the VIA Eden™ 1GHz ESP 10000, 533MHz ESP 5000, or 300MHz ESP 3000 CPUs.
In addition to the standard ReadyBoard features (4.5" x 6.5" form factor, PC-style connectors,
PC/104-Plus, +5 volt only power, etc.), the ReadyBoard 550 supports two primary IDE drives, one
CompactFlash Socket on secondary IDE, eight GPIO pins, four RS232 serial ports with the
RS485/RS422 option for two ports, dual 10/100BaseT Ethernet interfaces, four USB 1.1 ports,
IrDA, and AC'97 sound ports. It also supports up to 512MB of SDRAM in an SODIMM socket
and up to 32MB UMA of AGP 4X video with built-in LVDS, CRT, and 36-bit TFT support.
• ReadyBoard 560 – This EPIC single board computer (SBC) used for high volume embedded
applications provides designers with a low cost, low-power alternative to the high cost of high
performance processors. Through the use of advanced chipset technology with the VIA Eden 1GHz
ESP 10000 CPU, the ReadyBoard 560 provides DDR memory, USB 2.0 ports, Gigabit Ethernet and
advanced AGP 8x video. In addition to the standard ReadyBoard features (4.5" x 6.5" form factor,
PC-style connectors, PCI-104, +5 volt only power, etc.), the ReadyBoard 560 supports two primary
IDE drives, one CompactFlash Socket on secondary IDE, eight GPIO pins, four RS232 serial ports
with the RS485/RS422 option for two ports, 10/100BaseT and 1000BaseT Gigabit Ethernet
interfaces, four USB 2.0 ports, IrDA, and AC'97 sound ports. It also supports up to 1GB of DDR
SDRAM in an SODIMM socket and up to 64MB UMA of AGP 8X video with built-in LVDS,
CRT, and 36-bit TFT support.
• ReadyBoard 700 – This EPIC single board computer (SBC) is used for high volume embedded
applications and provides designers with a low cost, low-power choice of high performance Intel
933MHz LV Pentium III, 650MHz LV Celeron, or 400MHz ULVoltage Celeron processors. In
addition to the standard ReadyBoard features (4.5" x 6.5" form factor, PC-style connectors,
PC/104-Plus, +5 volt only power, etc.), the ReadyBoard 700 supports two primary IDE drives,
one CompactFlash Socket on secondary IDE, eight GPIO pins, four RS232 serial ports with the
RS485/RS422 option for two ports, dual 10/100BaseT Ethernet interfaces, four USB 1.1 ports,
IrDA, and AC'97 sound ports. It also supports up to 512MB of SDRAM in an SODIMM socket
and up to 32MB UMA of AGP 4X video with built-in LVDS, CRT, and 36-bit TFT support.
Other Ampro Products
•
CoreModule™ Family – These complete embedded-PC subsystems on single PC/104 or PC/104-
Plus form-factor (3.6x3.8 inches) modules feature 486, VIA Eden ESPs, Celeron, and Celeron M
CPUs. Each CoreModule includes a full complement of PC core logic functions, plus disk
controllers, and serial and parallel ports. Most modules also include CRT and flat panel graphics
controllers and/or an Ethernet interface. The CoreModules also come with built-in extras to meet
the critical reliability requirements of embedded applications. These include onboard solid state
disk compatibility, watchdog timer, smart power monitor, and Ampro embedded BIOS
extensions.
•
LittleBoard™ Family – These high-performance, highly integrated single-board computers use
the EBX form factor (5.75x8.00 inches), and are available with the Intel Pentium M or Celeron
M, Pentium III and Celeron, and VIA Eden processors. The EBX-compliant LittleBoard single-
board computers offer functions equivalent to a complete laptop or desktop PC system, plus
several expansion cards. Built-in extras to meet the critical requirements of embedded
applications include onboard solid state disk capability, watchdog timer, smart power monitor,
and Ampro embedded BIOS extensions.
•
MiniModule™ Family – This extensive line of peripheral interface modules compliant with
PC/104 and PC/104-Plus standards can be used with Ampro CoreModule, LittleBoard, and
ReadyBoard single-board computers to configure embedded system solutions. Ampro's highly
reliable MiniModule products currently support USB 2.0, IEEE 1394 (Firewire), Ethernet, PC
Card expansion, analog/data acquisition, FPGA, additional RS232/RS485 serial ports, and
general-purpose I/O (GPIO).
ReadyBoard 800 Reference Manual
About This Manual
3