Table of Contents
Advertisement
Chapter 1
Chip specifications used on the ReadyBoard 800:
•
Intel Corporation and the Pentium® M or Celeron® M processors and the chips, 82855GME and
82801DBM, used for the Northbridge/Video controller and Southbridge respectively.
Web site:
• Winbond Electronics, Corp. and the W83627HF chip used for the secondary I/O controller
Web site:
•
Intel Corporation and the 82551ER, used for the Ethernet controller.
Web site:
•
Intel Corporation and the 82541GI, used for the Gigabit Ethernet controller.
Web site:
Related Ampro Products
The following items are directly related to successfully using the Ampro product you have just
purchased or plan to purchase. Ampro highly recommends that you purchase and utilize a ReadyBoard
800 QuickStart Kit.
ReadyBoard 800 Support Products
• ReadyBoard 800 QuickStart Kit (QSK)
The QuickStart Kit includes the ReadyBoard 800, DDR memory, a cable kit, documentation, and
the ReadyBoard 800 Documentation and Software (Doc & SW) CD-ROM.
• ReadyBox™
The ReadyBoard 800 installed into a ReadyBox becomes a rapidly deployable system for OEM
production volumes. The ReadyBox provides all of the ReadyBoard 800's standard PC style
connectors accessible on the back panel, plus PC-style connectors for two additional serial ports
(4 total), two additional USB ports (4 total), one parallel port connector, three audio connectors,
and a slot for a CompactFlash card. The ReadyBox comes with a ATX power supply and a
removable drawer for a 2 ½" hard disk drive. Up to two PCI-104 or PC/104-Plus expansion
boards can be installed on the ReadyBoard 800 while in the ReadyBox chassis.
• ReadySystem 80
The ReadySystem 80 is a high performance, low cost turnkey system that comes with a
ReadyBoard 800 installed into a ReadyBox enclosure with 256MB SODIMM, plus a 2 ½" hard
disk drive pre-loaded with the Linux operating system. The ReadySystem 80 provides all of the
ReadyBoard 800's standard PC style connectors accessible on the back panel, plus adds PC-style
connectors for two additional serial ports (4 total), two additional USB ports (4 total), one parallel
port connector, three audio connectors, and a slot for a CompactFlash card. You can install up to
two PCI-104 or PC/104-Plus expansion boards into the ReadySystem. The ReadySystem 80
comes pre-tested and ready for application loading to provide customers with the fastest possible
deployment of their embedded applications. Refer to the ReadySystem 80 Users Guide on the
ReadyBoard 800 Documentation and Support Software (Doc & SW) CD-ROM for more
information.
•
ReadyBoard 800 Documentation and Software CD-ROM
The ReadyBoard 800 Documentation and Software (Doc & SW) CD-ROM is provided with the
ReadyBoard 800 QuickStart Kit. The CD-ROM includes all of the ReadyBoard 800
documentation, including this Reference Manual and the ReadyBoard 800 QuickStart Guide in
PDF format, the software utilities, board support packages, and drivers for the unique devices
used with Ampro supported operating systems.
2
http://www.intel.com
http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/627hf.pdf
http://developer.intel.com/design/network/products/82551er_DS
http://www.intel.com/design/network/datashts/82541gi_ei.pdf
Reference Manual
About This Manual
ReadyBoard 800
Advertisement
Table of Contents
