Table of Contents
Advertisement
Chapter 2
Board Features
• CPU features
♦
1.1GHz or 1.4GHz Low Voltage (LV) Intel Pentium M, or 600MHz Ultra Low Voltage
(ULV) Celeron M processors
♦
All processors support a Front Side Bus (FSB) of 400MHz
• Memory
♦
Single standard 200-pin DDR SODIMM socket
♦
Supports a single +2.5V DDR RAM SODIMM up to 1GB
♦
Supports PC2700 DDR 333 (166MHz)
• PCI-104 Bus Interface
♦
PCI 2.2 compliant
♦
PCI Bus speed at 33MHz
♦
PC/104-Plus, Optional (add-on MiniModule ISA expansion board)
♦
PC/104 Bus speed at 8MHz
• IDE Interfaces
♦
Provides two enhanced IDE controllers
♦
Supports two IDE drives on Primary IDE and one CompactFlash card on Secondary IDE
♦
Supports dual bus master mode
♦
Supports Ultra DMA 33/66/100 modes
♦
Supports ATAPI and DVD peripherals
♦
Supports IDE native and ATA compatibility modes
♦
CompactFlash Adapter (Secondary IDE only)
•
Supports IDE CompactFlash Card
•
Uses secondary IDE bus with Master/Slave jumper
•
Bootable
• Floppy/Parallel Interface
♦
Shared floppy/parallel connector
♦
Supports two floppy drives (1 standard 34-pin floppy drive and 1 USB floppy drive)
♦
Supports all standard PC/AT formats: 360KB, 1.2MB, 720KB, 1.44MB, 2.88MB
♦
Supports standard printer port
♦
Supports IEEE standard 1284 protocols of EPP and ECP outputs
♦
Bi-directional data lines
♦
Supports 16 byte FIFO for ECP mode
• Serial Ports
♦
Four buffered serial ports with full handshaking
♦
Provides two DB9 connectors Serial 1 & 2 (COM1 & COM2)
♦
Provides two serial ports Serial 3 & 4 (COM3 & COM4) through 20-pin header
♦
Provides 16550-equivalent controllers, each with a built-in 16-byte FIFO buffer
ReadyBoard 800
Reference Manual
Product Overview
7
Advertisement
Table of Contents
