What's In The Box; Setup Steps; Preparations; Figure 1-1. Readysystem 1U Accessories - Ampro ReadySystem 1U P/N 5001791A User Manual

Table of Contents

Advertisement

Chapter 1

What's in the Box

The Contents List identifies items in the shipping container of the ReadySystem 1U QuickStart Kit.
Production quantities of the ReadySystem 1U, except for the first of multiple boxes, may not contain
all of the optional items listed for the QuickStart Kit, but all boxes will have the standard items such
as the mounting hardware and the PS/2 Y-cable. The optional items, such as the power adapter,
power cords, and rack mount kit may be shipped separately. See Figure 1-1.
ReadySystem 1U

Setup Steps

It is important to follow the setup steps in this section in the exact order listed here, but skip any steps
that do not apply to your situation. References are provided to chapters within this guide or other Ampro
manuals for more information about installation and use of this ReadySystem 1U.

Preparations

1) Open shipping box
2) Verify Contents
3) Support Documentation
(ReadyBoard model
Documentation and
Support Software
(Doc & SW) CD-ROM
located in the first
QuickStart Kit)
2
Mounting
Hardware
PS/2 Y-Cable

Figure 1-1. ReadySystem 1U Accessories

• Locate the ReadySystem 1U Contents List. See Figure 1-1.
• Unpack the contents of the shipping box.
• Verify the contents of the shipping box against the Contents List
included with your ReadySystem 1U shipping box.
• If anything is missing or damaged, call your sales representative. Refer
to Appendix A for contact information.
ReadySystem 1U Users Guide
This document describes how to setup and power up the ReadySystem 1U and
is provided on the ReadyBoard model Doc & SW CD-ROM as a PDF file.
ReadyBoard Model Reference Manual
This document describes the ReadyBoard model used in the ReadySystem 1U
enclosure and provides detailed reference information for your ReadyBoard
and is located on the ReadyBoard model Doc & SW CD-ROM as a PDF file
ReadyBoard Model QuickStart Guide
This document describes how to setup, install, and power up the ReadyBoard
model installed inside the ReadySystem 1U enclosure and is located on the
ReadyBoard model Doc & SW CD-ROM as a PDF file.
Operating System Manual(s)
These documents describe how to use the desired operating system (OS) with
the ReadySystem 1U and provide more detailed programming and operating
information. These documents may or may not be provided with
ReadySystem 1U depending on the specific licensing requirements.
Users Guide
Setting Up the ReadySystem 1U
AC-DC
Convertor
Power
Cords (2)
Rack Mounting
CD-ROM
Hardware
ReadySystem 1U

Advertisement

Table of Contents
loading

This manual is also suitable for:

Readysystem 1u

Table of Contents