Starting System - Kubota RTV1140CPX Workshop Manual

RTV1140CPX, WSM

2. STARTING SYSTEM

(1) Battery
(2) Main Switch
(3) Slow Blow Fuse (60 A)
(4) Slow Blow Fuse (50 A)
(5) Fuse (20 A)
When the main switch is turned to the PREHEAT position, the terminal BAT is connected to the terminals GLOW
and ON. The glow plugs become red-hot, and the preheat indicator lamp also lights on while preheating.
When the main switch is then turned to the START position with the safety switches on, the terminal BAT is
connected to the terminals ST and ON. Consequently, battery current flows to the starter motor and start the engine.
The main switch automatically returns to the ON position, the terminal BAT is connected only to the terminal ON,
thereby causing the starting circuit to be opened, stopping the starter motor.
When the main switch turned from the ON position to the OFF position, the fuel cut-off solenoid moves the fuel
injection pump control rack to the "No Fuel Injection" position and stop the engine.
(6) Fuse (5 A)
(7) Fuse (5 A)
(8) Neutral Safety Switch
(9) Starter Relay
(10) Solenoid Relay
(11) Engine Stop Solenoid
(12) Glow Plug
(13) Starter
8-M2
ELECTRICAL SYSTEM
(14) Ground
A: To Combination Meter
(Glow Lamp)
9Y1210293ELM0001US0
KiSC issued 05, 2014 A