Preparation; Separating Power Steering Controller - Kubota RTV1140CPX Workshop Manual

RTV1140CPX, WSM

[2] PREPARATION

(1) Separating Power Steering Controller

Battery
CAUTION
• When disconnecting the battery cables, disconnect the
negative cable from the battery first. When connecting,
connect the positive cable to the battery first.
1. Set the seat to 1 row.
2. Remove the battery cover (1).
3. Remove the air cleaner hose (2).
4. Disconnect the negative cable (3) from the battery (4).
(1) Battery Cover
(2) Air Cleaner Hose
(3) Negative Cable
Bonnet Upper
1. Remove the snap pin and remove the bonnet upper (3).
2. Remove the ROPS pipes (1).
3. Lift ROPS boots and remove the three screws on both sides.
4. Remove the ROPS pipe (front) (2).
ROPS pipe mounting bolt
and nut
Tightening torque
ROPS (front) mounting
screw
(1) ROPS Pipe
(2) ROPS Pipe, Front
6-S5
STEERING
(4) Battery
(5) Positive Cable
9Y1210293ENS0025US0
48.0 to 55.8 N·m
4.90 to 5.69 kgf·m
35.4 to 41.1 lbf·ft
77.5 to 90.2 N·m
7.91 to 9.19 kgf·m
57.2 to 66.5 lbf·ft
(3) Bonnet Upper
9Y1210293STS0004US0
KiSC issued 05, 2014 A