Supported Device And Command Classes - Secure SRT321 User And Installation Instructions Manual

SUPPORTED DEVICE AND COMMAND CLASSES

Z-Wave Device Classes
Generic Device Class
Specific Device Class
Basic Device Class
Z-Wave Command
Classes
Manufacturer Specific
Command Class
Version Command Class Provides the version number of the Software
Thermostat Mode
Command Class
Binary Switch
Command Class
Multi Channel
Command Class
THERMOSTAT GENERIC DEVICE CLASS
SPECIFIC TYPE NOT USED
PORTABLE CONTROLLER
Secure Manufacture ID
This Command Class will use thermostat modes
7
'OFF' and 'HEAT' to control a 3rd party unit.
The SRT321 will be associated in group 1.
This will use SET commands to control a 3rd
7
Party unit, and be associated in group 2.
The SRT321 will respond to the Multilevel
Sensor GET command with a Multilevel Sensor
REPORT. This report can be requested or sent
unsolicited to the nodes in Group 5.
If the temperature sensor functionality is
disabled, the SRT321 will report 0x8000.
Implemented Device Classes
Description
Continued on next page...
16