Secure SRT321 User And Installation Instructions Manual page 14

1 Once the character starts flashing the installer has
60 sec to activate the 3rd party unit, once the 3rd
party unit has been activated the process must be
completed within 240 sec or SRT321 will timeout.
2 If an outcome is not received within 5sec the
SRT321 will report a failure.
3 On selecting this function the installer has 60s to
initiate a 3rd party unit before the SRT321 times
out and reports a failure
4 Nodes supporting 'Thermostat Mode Command
Class' will be associated/dissociated with Group 1
and nodes supporting 'Binary Switch Command
Class' will be associated/dissociated with Group 2.
5 All association settings will be lost if learn mode has
been activated with another controller regardless of
a pass or fail result, any associations settings will
have to be re-configured either remotely or manually.
14