Cleaning Blade Foreign Matter Removal Control; Transfer Belt New Article Detection - Konica Minolta BizHub C360 Service Manual

Hide thumbs Also See for BizHub C360:

Table of Contents

13. 1ST IMAGE TRANSFER SECTION

Cleaning blade foreign matter removal control

• The transfer belt is rotated backward to a small extent and then rotated forward to

remove foreign matter (dust, toner, etc.) wedged between the transfer belt and the edge

of the cleaning blade.

A. Operation timing

• The backward rotation control is provided at the completion of every print job.

Toner collecting screw

• The image transfer belt unit is not provided with any new article detection mechanism. If

the transfer belt is replaced with a new one, therefore, "New Release" must be performed

in "Counter/ Life" of the Service Mode. For detailed operating procedures, see Field Ser-

Cleaning blade

Theory of Operation Ver. 1.0 Jul. 2009

Transfer belt

driven roller

A0EDT2C072DA

A0EDT2E309DA

Table of Contents

Bizhub c280 Bizhub c220