Transfer Belt Cleaning - Konica Minolta BizHub C360 Service Manual
Hide thumbs
Also See for BizHub C360:
- Service manual (1150 pages) ,
- User manual (402 pages) ,
- Installation manual (25 pages)
Table of Contents
Advertisement
13. 1ST IMAGE TRANSFER SECTION
13.3.5
Transfer belt cleaning
• The toner image on the surface of the transfer belt is transferred onto the paper (2nd
image transfer).
• Part of the toner image is left on the surface of the transfer belt after the 2nd image trans-
fer. A cleaning blade is provided on the transfer belt. It functions to remove the residual
toner (waste toner).
Drive transmission gear
Toner collecting screw
A. Cleaning blade
• The cleaning blade, of a fixed blade type, is pressed up against the surface of the trans-
fer belt at all times. No cleaning blade retraction mechanism is provided.
• The waste toner on the surface of the transfer belt is scraped off as the transfer belt is
rotated.
122
Transfer belt
Transfer belt driven roller
Cleaning blade
Toner collecting screw
Transfer belt rotative direction (forward rotation)
Cleaning blade
Theory of Operation Ver. 1.0 Jul. 2009
Caking-of-toner prevention blade
Transfer belt
Transfer belt
driven roller
A0EDT2C071DA
A0EDT2C066DA
Advertisement
Chapters
Table of Contents
