Konica Minolta BizHub C360 Service Manual page 142

Theory of Operation Ver. 1.0 Jul. 2009
B. Front door open/close detection mechanism
• The front door switch detects that the front door is opened or closed.
• When the front door is closed, the open/close detection protrusion provided at the upper
portion on the left side of the front door presses the actuator of the front door switch. This
turns ON the front door switch and the machine determines that the front door is closed.
• When the front door is opened, the front door switch actuator is released, which turns
OFF the front door switch. The machine then determines that the front door is open and
shows a message that prompts the operator to close the front door.
• When it is determined that the front door is open, use of all jobs but the fax reception job
is prohibited. In addition, a paper misfeed results if the front door is opened during a print
job.
Door lock magnet
Front door switch
(MS1)
Handle
Total counter
Main power switch
(SW1)
12. TONER SUPPLY SECTION
Door lock magnet
Handle
A0EDT2C269DA
A0EDT2E308DA
109