Konica Minolta BizHub C360 Service Manual page 271

22. DUPLEX SECTION
B. 2 sheets operation
Operation 1
• The first sheet of paper is taken up and fed in from the
main body drawer and the main body starts the first print
cycle to produce the print image of the second page of the
original.
Operation 2
• Immediately before the first 1-sided print leaves the paper
exit/switch back roller, the direction of rotation of the paper
exit/switch back roller is reversed and the first 1-sided print
is transported toward and into the duplex unit.
• At the same time, the second sheet of paper is taken up and
fed into the main body.
Operation 3
• The main body carries out the first print cycle for the second
sheet of paper to produce the print image of the fourth page
of the original.
• At the same time, the first 1-sided print is transported
through the duplex unit.
Operation 4
• The main body produces the print image of the first page of
the original on the first 1-sided print that has been fed
through the duplex unit.
• At the same time, the second sheet of paper is subjected to
a switchback sequence at the exit section and fed into the
duplex unit.
• At the same time, the third sheet of paper is taken up and
fed into the main body.
Operation 5
• While feeding the first 2-sided print out, main body produces
the print image of the 6th page of the original on the third
sheet of paper.
• The second sheet of paper will wait in front of the duplex
transport roller 3.
238
Theory of Operation Ver. 1.0 Jul. 2009
Paper exit/switch back roller
2
2
1
2
4066T2C506DA
4066T2C507DA
4
2
4066T2C508DA
1 2
4
6
4066T2C509DA
6
4
4066T2C510DA