1St Image Transfer Control - Konica Minolta BizHub C360 Service Manual

Theory of Operation Ver. 1.0 Jul. 2009
13.3.4

1st image transfer control

• To transfer the toner image formed on the surface of the PC drum onto the transfer belt,
the transfer current supplied from the high voltage unit is applied to the 1st image trans-
fer roller of each color.
• For the 1st image transfer output current value, a fixed value is used for each process
speed (full speed, half speed).
1st image transfer current
application terminal/M
1st image transfer roller/Y
13. 1ST IMAGE TRANSFER SECTION
1st image transfer current
application terminal/K
1st image transfer current
application terminal/C
1st image transfer current
application terminal/Y
1st image transfer roller/C
1st image transfer roller/M
1st image transfer roller/K
A0EDT2C065DA
121