Charge Neutralization And Separation Of Paper - Konica Minolta BizHub C360 Service Manual

14. 2ND IMAGE TRANSFER SECTION
14.3.4

Charge neutralization and separation of paper

• To neutralize any residual potential on the paper which has undergone the 2nd image
transfer process, there is a charge neutralizing needle mounted on the guide plate after
the 2nd image transfer roller. There is a resin guide that prevents the electrode from
directly contacting the paper.
• The residual potential neutralized by the charge neutralizing needle is grounded via a
conductive plate.
• In order to separate the paper from the transfer belt without fail after the 2nd image trans-
fer, a separation claw is mounted (center one point.)
Transfer belt
Image transfer paper guide
Resin guide
136
Theory of Operation Ver. 1.0 Jul. 2009
Charge neutralizing needle conductive plate (ground)
Image transfer paper guide conductive plate (ground)
Charge neutralizing needle
A0EDT2C085DA
Paper winding prevention guide
(Standard for Japan market only)
Separation claw
Charge neutralizing
needle
2nd image transfer
roller
A0EDT2C081DA
Charge neutralizing needle
A0EDT2C086DA