Konica Minolta BizHub C360 Service Manual page 134

Theory of Operation Ver. 1.0 Jul. 2009
(2) Toner empty display
• The screen mode to be displayed when a toner empty is detected can be selected by
specifying the person who replaces the unit in the "System 2/ Unit Change" in the Ser-
vice Mode.
• When User is selected as the person, the message requesting toner cartridge replace-
ment by user is displayed when a toner empty condition is detected. (Toner cartridge
needs to be replaced. Replace it following the instructions.)
• When Service is selected as the person, the message prompting service engineer to
replace the toner cartridge is displayed. (There is no toner. Contact your service repre-
sentative.)
NOTE
• A different toner hopper empty display appears if "User" is selected for "Unit
Change" in the Service Mode.
C. Number of printed pages
Toner cartridge
K
Y,M,C
NOTES
• The number of printed pages represents a value that is calculated based the
amount of toner consumed when the machine is used in the standard job mode. It
varies depending on how the machine is used by the user.
• For details, see "Outline/ Materials" of Field Service.
No. of printed pages (unit: pages)
Near empty
28,000
25,000
12. TONER SUPPLY SECTION
Empty
29,000
26,000
A0EDT2E307DA
101