Lcd Display Test - Lincoln Electric INVERTEC POWER WAVE 450 SVM112-B Service Manual

F-135
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical trou-
bleshooting assistance before you proceed. Call 1-800-833-9353 (WELD).
TEST DESCRIPTION
This test will determine if there are any faults in the LCD display on the front panel or in the
associated hardware and wiring harness.
MATERIALS NEEDED
Volt/Ohmmeter (Multimeter)
5/16" Nut driver
3/8" Nut driver
Internal Auxiliary Supply Wiring Diagram – Figure F.52
This procedure takes approximately 30 minutes to perform.
TROUBLESHOOTING & REPAIR

LCD DISPLAY TEST

WARNING
POWER WAVE 450
F-135