Fan Motor Removal And Replacement - Lincoln Electric INVERTEC POWER WAVE 450 SVM112-B Service Manual

F-167

FAN MOTOR REMOVAL AND REPLACEMENT

Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical trou-
bleshooting assistance before you proceed. Call 1-800-833-9353 (WELD).
DESCRIPTION
The following procedure will aid the technician in removing the machine fan motor for main-
tenance or replacement.
MATERIALS NEEDED
5/16" Nut driver
3/8" Nut driver
3/4" Open or box end wrench
Wire cutters
Slot head screw driver
Machine Wiring Diagram in the Electrical Diagrams section of this manual
This procedure takes approximately 30 minutes to perform.
TROUBLESHOOTING & REPAIR
WARNING
POWER WAVE 450
F-167