I/O TC5000 User Manual page 63

4. Click the Add button. The Service Name screen will appear.
Service Type: Select either POP3 or IMAP4 depending upon your e-mail server type.
Service Name: Enter a unique name for this mail server.
Click OK to continue.
5. On the Service Definition screen, complete the following. Then click Next> to continue.
Connection: Select Network Connection from the drop down list. Other types of connections are
not supported for e-mail.
POP3 Host: Enter the name of your e-mail server.
User ID: Enter your e-mail username.
Password: Enter the password for your e-mail account. If you do not enter the password, each
time you connect to the e-mail server, you will be prompted to enter the password.
Save Password: Check this box to have your password remembered so that you will not be asked
for it each time you connect to the e-mail server.
Domain: If you are connecting to a network that uses Windows NT domain security, enter the
Windows NT domain name here. Generally most ISP based e-mail servers do not require this.
SMTP Host for sending mail: If your e-mail service uses a separate server for SMTP, enter the
name in this field. POP3 services use this field.
Return Address: Enter the desired return to e-mail address in this field.
Thin Client User's Guide
Using Connections
63