I/O TC5000 User Manual page 128

0027
0029
0040
0042
0043
0044
0045
0050
0051
0052
0054
Thin Client User's Guide
A key was pressed not used by the display module
Press RESET and continue using valid keys.
Second key pressed during the diacritic mark key function
was not a valid combination.
Press RESET and enter a valid combination.
The "Data Set Ready" line is inactive, and should be active.
Recovery must be made at the remote control unit.
The "Receive Clock" signal failed.
Recovery must be made at the remote control unit.
The "Data Set Ready" line is active and should be inactive.
Recovery must be made at the remote control unit.
The 30-second communications time-out expired with out
valid data received.
Recovery must be made at the remote control unit.
"Data Set Ready" will not activate.
Recovery must be made at the remote control unit.
Either the "Clear to Send" line was inactive while the
"Request to Send " line was active or the "Clear to Send"
line was active while the "Request to Send" line was
inactive.
Recovery must be made at the remote control unit.
The transmit clock signal failed during a transmit operation.
Recovery must be made at the remote control unit.
The remote control unit detected an error.
Recovery must be made at the remote control unit.
The remote control unit received invalid commands from
the system during communication.
Recovery must be made at the remote control unit.
Troubleshooting
128