Table of Contents
Advertisement
Saving / Restoring the Thin Client's Configuration
Through the I-O Configuration Utility, it is possible to save a copy of the thin client's configuration file.
This file can used for the following purposes:
Re-apply the configuration to the thin client after factory defaults have been restored – eliminates
having to remember all the settings for a specific thin client.
Copy a master configuration to newly installed thin clients – eliminates the time of visiting each thin
client and setting it up.
C
AUTION
THIN CLIENT CONFIGURATION PARAMETERS
ARE USED IN THE
. T
FILE
HEN AFTER THE MASTER CONFIGURATION IS BEING SENT TO ANOTHER THIN CLIENT
ADDRESS OF THE TARGET THIN CLIENT MUST BE CHANGED
Saving a Configuration
1. Start the I-O Configuration Utility.
2. On the List of Devices screen, highlight the desired thin client
3. On the Options menu, select the Thin Client Config Copy option, then select Retrieve
Configuration.
4. Enter the name for the file, and click OK. You may need to browse to the desired directory to save
the configuration files in. Configuration files will have a file extension of .cfg.
Thin Client User's Guide
: C
ARE SHOULD BE TAKEN IN CREATING A MASTER CONFIGURATION FILE
LAN. A
IP
MASTER
. T
HIS COULD CAUSE PROBLEMS IF STATIC
ADDRESS SHOULD BE USED WHEN SAVING THE CONFIGURATION
.
Troubleshooting
. I
T WILL CONTAIN ALL
IP
ADDRESSES
,
IP
THE
135
Advertisement
Table of Contents
