Specifying Autostart / Default Connection; Editing A Connection - I/O TC5000 User Manual

4. Click OK.
5. Certain connections will start a configuration wizard. Follow the wizard prompts. Refer to the
appropriate sections in this manual for more information on configuring the different type of
connections.
TIP: F
OR MORE DETAILED CONFIGURATION INFORMATION
P
RINTING
THROUGH THE

Specifying AutoStart / Default Connection

This section describes the procedure to configure the thin client to automatically start or highlight a
particular connection when the thin client is switched on.
1. Select the Configure sheet from the Terminal Connection Manager window.
2. Click on the connection for which you want to specify AutoStart or Default properties.
3. Click the Startup... button. The Connection Startup dialog-box is displayed.
The above dialog-box has two radio-buttons:
Make the selected connection your default connection
If you select this radio-button, the connection you selected in step 2 will be highlighted every
time you switch on the thin client. The word Default will be displayed in the Startup column of
the Configure tab of the Terminal Connection Manager.
Automatically start the selected connection at startup
If you select this radio-button, the connection you selected in step 2 will be automatically started
every time you switch on the thin client. The word AutoStart will be displayed in the Startup
column of the Configure tab of the Terminal Connection Manager.
4. After configuring the default and auto-start properties, click OK to return to the Configure screen.

Editing a Connection

1. Select the Configure sheet from the Terminal Connection Manager window.
2. Highlight the connection to be edited.
Thin Client User's Guide
, T E
ERMINAL MULATION AND
C U
ONFIGURATION TILITY
,
ADDITIONAL GUIDES FOR THE
ICA
CLIENT ARE INCLUDED ON THE
' H .
S ELP MENU
Creating Connections
TN5250
E
CD
OR ARE ACCESSIBLE
23