Colors; Screen Saver - I/O TC5000 User Manual

The screen then clear and a following message box will be displayed.
If the appropriate test pattern was displayed, click Yes to return to the setup wizard.
If the test pattern was not properly displayed, click No. The following message is displayed.
Click OK to change the setting and repeat the test.
C
AUTION
DO SO WILL RESULT IN THE THIN CLIENT NOT BEING ABLE TO DISPLAY THE SCREEN
I
F YOU HAVE SELECTED AN UNSUPPORTED SETTING AND THE MONITOR DOES NOT DISPLAY THE SCREEN
YOU WILL NEED TO RESTART THE THIN CLIENT
P B
OWER
B
UTTON TO POWER UP THE THIN CLIENT
PRESS THE
RESTORED TO THE FACTORY DEFAULTS AND THE

Colors

Select the color pallet that your monitor supports from the Colors drop down box

Screen Saver

Enable the screen saver, if desired, by checking the Enable Screen Saver box. Select the time to wait
before the screen activates from the scroll box.
Click Next to proceed.
Thin Client User's Guide
: U TEST
SE THE BUTTON TO TEST THE SELECTED RESOLUTION OF THE MONITOR
UTTON FOR SEVERAL SECONDS UNTIL THE
F7 . A
KEY SEVERAL TIMES
. S
HUT DOWN THE THIN CLIENT BY HOLDING IN THE
P LED
OWER
. I
MMEDIATELY AFTER THE
FTER A FEW SECONDS THE THIN CLIENT
S W
ETUP IZARD WILL START
Setup the Thin Client
. F
.
. P P
GOES OUT RESS THE OWER
I-O S
PLASH SCREEN CLEARS
'
S SETTINGS WILL BE
.
AILURE TO
,
,
17