Restoring Factory Defaults
The purpose of restoring factory defaults is to clear all configuration settings and return the thin client to
its factory defaults. There are two methods of restoring factory defaults.
During the boot up process
From the Terminal Properties | General Tab
C
AUTION
AND CONFIGURATION SETTINGS IN THE THIN CLIENT
PROCESS BEFORE PROCEEDING
TO RESETTING THE FACTORY DEFAULTS
Boot Up Process
1. When the thin client is initially being powered up, press the F7 key several times immediately after
the I-O Splash screen has cleared.
2. The Setup Wizard will then begin.
General Tab Process
1. From the Connection Manager, press the F2 key to display the Terminal Property's General Tab
2. Check the Reset the terminal to factory-default property settings box.
3. The System Setting Change screen will appear. Click the Yes button to confirm that the factory
defaults will be restore when the thin client is reset.
Thin Client User's Guide
: R
ESETTING THE THIN CLIENT TO FACTORY DEFAULTS WILL CLEAR ALL CONNECTION ENTRIES
. (I
T MIGHT BE WISE TO COPY THE THIN CLIENT
. M
AKE CERTAIN YOU REALLY WANT TO DO THIS
.)
Troubleshooting
'
S CONFIGURATION PRIOR
138