Setup The Thin Client; Step One: Start The Setup Wizard - I/O TC5000 User Manual

Setup the Thin Client

This chapter describes the procedure to setup the software of the thin client. This procedure must be
performed by the system administrator. It is assumed the thin client has been installed properly using
the instructions in the previous section.

Step One: Start the Setup Wizard

When you switch the thin client on for the first time or if the thin client has been reset to factory defaults,
a Setup Wizard is automatically started. The wizard will guide you through the process of configuring
the thin client.
N : T
OTE
W
HEN YOU SWITCH THE THIN CLIENT ON FOR THE FIRST TIME
W
HEN YOU RESTORE DEFAULT SETTINGS OF THE THIN CLIENT THROUGH THE
T
ERMINAL
The Setup Wizard has several dialog boxes that display in succession. Some dialog boxes provide
information, while others require input. Every dialog-box contains buttons to take you backward or
forward through the setup process, and to confirm or cancel input and selections.
The first dialog box of the Setup Wizard is shown below. Click Next> to continue.
Thin Client User's Guide
S W
HE ETUP IZARD IS STARTED AUTOMATICALLY UNDER THE FOLLOWING CIRCUMSTANCES
P
ROPERTIES DIALOG
- .
BOX
Setup the Thin Client
.
G
ENERAL
H
:
TAB OF THE
H
13