Cappuccino Selection - Faema X2 GRANDITALIA User Manual

English
5.1 Key menu - Milk selection
Press one of the milk dispensing keys (32). The related LED remains
on and does not blink. The display appears as follows:
KEY MENU
Type
Milk dose
Emulsion
HM/FM
emulsion stop
5.2 Key menu - Cappuccino selection
Press one of the cappuccino dispensing keys (32). The related LED
remains on and does not blink. The display appears as follows:
KEY MENU
Type
Milk dose
Coffee start
Emulsion
HM/FM
emulsion stop
Water dose
Cappuccino selection parameters that can be changed are:
- Type (personalization key, i.e., 1 cappuccino, 2 coffees, 2
cappuccinos, milk, short washing, stop, disable);
- Milk dose (milk dispensing time: 0 ÷ 60 seconds, with increments
of 0.1);
- Milk start/coffee start ** (milk dispensing delayed after coffee
dispensing, and vice versa)
- Emulsion (foamed milk dispensing time, from 0 to 60, with
increments of 1 second);
You can use the"+" (30) and "-" (31) keys to change the "Start milk"
setting (milk dispensing start delayed after coffee dispensing and
vice versa) from "00" to "99" with "1" second increments.
If over "99" is set, the "Start milk" setting will become the "Start
coffee" setting (coffee dispensing start delayed after the milk
dispensing), then the setting returns to "Start milk" in a cycle.
The default settings for
cappuccino selections are:
Start milk 00.
+
u
milk
07.0
05.0
YES
YES
u
+
u
1 cappuccino
04.0
10
02.0
YES
YES
u
100
(**) Start milk/Start coffee function
Start Milk
00 99
99 00
Start Coffee
Milk selection parameters that can be changed are:
- Type (personalization key, i.e., 1 cappuccino, 2 coffees, 2
cappuccinos, milk, short washing, stop, disable);
- Milk dose (milk dispensing time: 0 ÷ 60 seconds, with increments
of 0.1);
- Emulsion (foamed milk dispensing time, from 0 to 60, with
increments of 1 second);
- HM/FM (this parameter lets you decide which type of milk (frothed
or regular) to dispense first.
YES: regular milk – frothed milk
NO: frothed milk – regular milk;
- Emulsion stop YES/NO (with the "emulsion stop" function set
(YES): foamed milk dispensing time, from 0 to 58, with increments of
1 second. The maximum setting time is always 2 seconds less
respect "milk dose");
- HM/FM (this parameter lets you decide which type of milk (frothed
or regular) to dispense first.
YES: regular milk – frothed milk
NO: frothed milk – regular milk.
- Emulsion stop YES/NO (with the "emulsion stop" function set
(YES): foamed milk dispensing time, from 0 to 58, with increments of
1 second. The maximum setting time is always 2 seconds less
respect "milk dose");
- Water dose (volumetric dosage pulses: 0 ÷ 999, with increments
of 1)
- Coffee dose MSx (left grinder encoder pulses: 0 ÷ 200, with
increments of 1)
- Coffee dose MDx (right grinder encoder pulses: 0 ÷ 200, with
increments of 1)
- backing (the return time for the chamber, which can be adjusted
for each key: from 0 to 6 with increments of 0.1 seconds.)
- infusion (infusion time: 0 ÷ 6 seconds, with increments of 0.1)
- pressure release (pressure release time: 0 ÷ 5 seconds, with
increments of 0.1)
- drying (pod drying time; 0 ÷ 5 seconds, with increments of 0.1).
Note: the coffee doses for both grinders set in the technical
programming menu, are subject to change in the customer
programming menu within a range of + 10 of the set value.
By setting:
"Start milk 00" - milk dispensing takes place when the selection key
is pressed. After a few seconds, coffee is dispensed;
"Start milk 99" or at a high setting that exceeds the coffee
dispensing time - milk dispensing starts after coffee is dispensed.
"Start milk 05" - coffee dispensing starts, and 5 seconds after the
selection key is pressed, milk is dispensed.
Note: If the time setting exceeds the coffee dispensing time, milk
dispensing begins immediately after coffee is dispensed.
"Start coffee 00" - Coffee dispensing starts after milk is dispensed.
"Start coffee 99" or any setting other than 0 - coffee dispensing will
start 99 seconds (or after the set time) after milk is dispensed.
English