Daily Powering; Dispensing Of Beverages - Coffee - Faema X2 GRANDITALIA User Manual

English

2. Daily powering

"Before setting the machine at work, make sure
!
that the main electric power switch is on and
that the mains water cock has been turned on".
MANUAL POWERING
Set in action the main switch (23) to turn on the machine. The
following message will appear on the display (5):
19 April
wednesday
***********************************
MACHINE COLD
***********************************
The message "MACHINE COLD" is alternated to other
eventual massages of warning (ex. "NO COFFEE SX", "NO
COFFEE DX", etc).
18
3
1

3. Dispensing of beverages - Coffee

GENERAL INFORMATION
Place the cup (or cups) under dispenser (1) of the required
group.
Adjust the height of the dispenser (1) if necessary.
Press the coffee dispensing key relative to the selected dose.
The led of the selected key lights up and dispensing
commences.
Dispensing stops automatically.
Delivery of powdered coffee for machines without
automatic dosers
After having positioned the cup under the spout,open the
decaffeinated coffee panel (18) and measure out a dose of
powdered coffee into the tube and close the powdered coffee
panel (18). The leds relative to the keys programmed for one
cup located on the display panel (3) will turn on. Also, keys in
second selection and special key (25) will blink alternatively
if programmed (see paragraph "Special function" on the
following pages).
Press one of the keys associated to the ignited leds that
corresponds to the desired dose.
AUTOMATIC SWITCH OFF (see service time menu)
The machine executes a short washing cycle and then it
switches off automatically to the programmed timetable.
During the phase of switch off, on the display it comes
visualized the below message.
2006
15:15:04
N.B. When the machine is working in the automatic on/off
function do not use the general switch (23) to switch off the
machine. If this happens, the machine will not be able to
switch on again automatically.
AUTOMATIC SWITCH ON
The machine switches on automatically at the programmed
timed. The messages displayed and the operations per-
formed by the machine are the same as those described in
the paragraph "MANUAL POWERING". A short washing cycle
is also performed automatically.
5
FORCED SWITCH ON
Press the STOP (33) key for a few seconds to force the
machine on again.
N.B. Forcing the machine on does not change the
programmed on/off times.
N.B. At this point the machine will remain on until the next
switch off time is reached.
To immediately return the machine to "off" as originally
programmed, switch it off and on again using the general
23
on-off switch (23).
Coffee STOP function
Use STOP (33) key to stop coffee dispensing before the
programmed dose has been reached.
NOTE: use of the STOP (33) button will not modify the
programmed parameters.
SECTION REPETITION Function
The repeat selections function can be programmed in the
following way. Press any one of the selection keys and after
about 3 seconds press the same key again for the number of
dispensed drinks required.
The number of dispensed drinks programmed is indicated on
the top left of the display. Press the STOP (33) key and keep
pressed for about 3 sec. to reset.
NOTE: These functions are deactivated when error messages
and/or codes are displayed.
19 April
wednesday
******** MACHINE OFF *********
English
2006
15:15:04