Data Menu: Counters; Data Menu: Info - Faema X2 GRANDITALIA User Manual

English

12. DATA menu: COUNTERS

Once you have entered the programming menu, access the DATA
MENU, pressing the "i" (27) key. The following will be displayed:
DATA MENU
COUNTERS MENU
INFO
WASH 1 ARCHIVE
MALFUNCT. ARCHIVE
Use the "+" (30) and "-" (31) keys to position the cursor on the
COUNTER line, then press the PRG (29) key. The following will appear
on the display:
COUNTERS MENU
N° coffee
N° milk
N° water
N° steam
N° steam+air
N° tot coffee
N° cycles

13. DATA menu: INFO

DATA MENU
COUNTERS MENU
INFO
WASH 1 ARCHIVE
MALFUNCT. ARCHIVE
Use the "+" (30) and "-" (31) keys to position the cursor on the INFO
line, then press the PRG (29) key. The following will be displayed.
INFO
SERIAL N°
VERSION SW
SETUP
DIP SETTINGS
+
u
Parameters calculated are:
u
- N. coffee (number of coffee beverages)
- N. milk (number of milk beverages)
- N. water (number of times water is dispensed)
- N. steam (number of times steam is dispensed using the turbosteam
function)
- N. steam + air (number of times steam and air are dispensed using
the turbosteam function)
+
- N. tot coffee (total number of coffee beverages)
u
- N. cycles (total number of cycles performed)
25
- N. Msx (number of grinding phases performed by the left grinder)
15
- N. Mdx (number of grinding phases performed by the right grinder)
10
- Hours (Machine life time)
5
9
Counters can be zeroed by aligning the cursor on the selected entry,
56
pressing the PRG (29) key, and then pressing the '+" (30) or "-" (31)
u
95
key.
Note: Parameters that cannot be zeroed are:
- N. tot coffee
- N. cycles
- N. Hours
+
u
u
Serial number
Press the PRG (29) key on the "serial n." line. The following will appear
on the display.
+
u
u
COUNTERS MENU
N° MSX
N° MDX
Hours
SERIAL NUMBER
123456
English
+
u
25
41
120
u
+
u
u