Key Menu - Coffee Selection; Grindind Variation - Faema X2 GRANDITALIA User Manual

English

3.1 Key menu - Coffee selection

Press one of the coffee dispensing keys (32) (the relative led
will remain on). The following message will appear on the
display:
KEY MENU
Type
repetition
Water dose
MSX cof, dose
MDX cof, dose
Water Start
The following coffee selection parameters can be modified:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099);
- water dose (volumetric dosage pulses, from 0 to 999, with
increments of 1);

Grindind variation

The machine is equipped with devices that permit grinding
variations without having to dismantle the panels on the
machine body.
To modify grinding parameters, adjust the devices behind
the hoppers at the rear of the machine:
- raise mechanism A
- turn it clockwise if you want a finer grind, or turn it counter-
clockwise if you want a coarser grind.
- once the adjustment has been made, lower mechanism A,
making sure it is inserted in one of the special notches
Grinding adjustments can be performed separately and
independently for the two grinders. The field range is + 4
notches compared to the middle position X.
This operation corrects the parameters for ALL selections
associated with the grinder that was modified.
+
u
1 coffee
001
110
043
000
400
u
- coffee dose ... (coffee dose grinde ...impulses, 0 ÷ 200 with
increments of 1);
- water start (volumetric dosage pulses, from 0 to 999, with
increments of 1).
The dose for making a cup of coffee can be composed of
grounds taken from both hoppers, which has the advantage
of less time needed for grinding.
The dose setting for both grinders has a field range of + 10
of the value set in the technical programming menu.
Example
technical programming
coffee dose MSx 045
coffee dose MDx 020
A
+4
English
customer programming
coffee dose MSx 035÷055
coffee dose MDx 010÷030
A
-4
X