Dispensing Of Beverages - Cappuccino / Milk - Faema X2 GRANDITALIA User Manual

English
3.3 Dispensing of beverages - Cappuccino / milk (Cappuccino-Maker version)
GENERAL INDICATIONS
Milk is a delicate biological product and can easily deteriorate.
Heat modifies its structure. Milk must be kept at a storage
temperature no higher than 5°C (41°F) from the moment the
container is opened and throughout its entire period of use.
Our storage appliances are suitable for this purpose.
NOTE: at the end of the work day (or not more than 24 hours
from the time the container is opened), any remaining milk
must be discarded.
Preliminary operations
Insert the tube (40) into the milk container.
Place the cup (or cups) under the dispenser (1).
If necessary, adjust the dispenser height.
Cappuccino dispenser
Press the cappuccino dispensing button corresponding to
the required dose. The led in the selected button will come
on and dispensing will begin. Dispensing will stop
automatically.
Dispensing can also be interrupted by pressing the STOP
key (33).
If the milk and coffee are poured into the cup simultaneously,
the STOP key (33) needs to be pressed once only to stop
dispensing.
If the milk and coffee are not poured into the cup
simultaneously, when the STOP key (33) is pressed the liquid
currently being dispensed will stop. When the STOP key (33)
is pressed a second time the next dispensing phase will be
stopped.
Delivery of cappuccino with powdered coffee for machines
without automatic doser
Open the decaffeinated coffee panel (18) and measure out a
dose of powdered coffee into the tube and close the powdered
coffee panel (18). The leds relative to the keys programmed
for one cup located on the display panel (3) will turn on. Also,
keys in second selection and special key will blink alternatively
if programmed.
Press one of the keys associated to the ignited leds that
corresponds to the desired dose.
Delivery terminates automatically.
Milk dispenser
Press the milk dispensing button corresponding to the
required dose. The led in the selected button will come on
and dispensing will begin. Dispensing will stop automatically.
Dispensing may be interrupted by pressing the STOP key
(33).
OPTIONS
The options indicated in section "3. Coffee dispensing" are
available.
The technician who installs the machine can also be asked
to personalize the cappuccino buttons in the following ways:
- milk dispensing before the coffee or vice versa (only when
cappuccino is dispensed);
Proceed as explained
PROGRAMMING" to obtain hot or tepid milk.
18
3
40
English
in section "CUSTOMER
33
1