Creating A Cue; Recalling A Cue - Studer Vista 5 M2 Operating Instructions Manual

Vista 5 Digital Mixing System
4.9.3.2

Creating a Cue

Drag&Drop Events
MIDI In Event
Event Options
(if Event Selected)
4.9.3.3

Recalling a Cue

4-106 GC Operation
MIDI Out Event
To create a cue, simply drag-and-drop one of the available SNAPSHOTS
from the left, or one of the Events from below the snapshots into the cue
area. A cue can be created using the Make button on the right side of the cue
list. It doesn't have to contain a snapshot; it is also possible to just fi ll in any
event without activating any console setting changes.
There are different ways to recall a cue:
• Double-click on its name
• Click on the NEXT or PREV button on the GC's control screen
• If the cue list is armed: Attach an incoming MIDI event to it and send the
appropriate note or program change command to the console
• If the cue list is armed: Press NEXT or PREV on the control bay
• Send MIDI show control messages to the console, according to the speci-
fi cation given below.
SW V3.6 Date printed: 06.12.06