Master Panel - Studer Vista 5 M2 Operating Instructions Manual

D950/Vista7 Digital Mixing System
5.21.5

Master Panel

Touch Hold:
5-190 AutoTouch+
This option page allows you to over-ride certain settings of the system that
are normally controlled by the AutoTouch+ Panel. This allows for the
AutoTouch+ Panel to control functions for certain types of controls while
allowing other types of controls to remain in specific modes or be blocked
by them.
Faders/Encoders:
<Follows Panel>: Faders and Encoders (knobs) will follow the settings of
the AutoTouch+ panel in regards to Touch Hold.
<On>: Faders and Encoders (knobs) will always be in Touch Hold mode
regardless of the settings of the AutoTouch+ Panel.
<Off>: Faders and Encoders (knobs) will never be in Touch Hold mode
regardless of the settings of the AutoTouch+ Panel.
Switches:
<Follows Panel>: Switches (keys) and Selectors (keys or knobs) will fol-
low the settings of the AutoTouch+ panel in regards to Touch Hold.
<On>: Switches (keys) and Selectors (keys or knobs) will always be in
Touch Hold mode regardless of the settings of the AutoTouch+ Panel.
<Off>: Switches (keys) and Selectors (keys or knobs) will never be in
Touch Hold mode regardless of the settings of the AutoTouch+ Panel.
SW V3.3 Date printed: 27.08.03