Channel-Related Views; Dynamics Parameters - Studer Vista 5 M2 Operating Instructions Manual

Vista Digital Mixing System
A.4

Channel-Related Views

A.4.1

Dynamics Parameters

[1]
[2]
Parameters Shared by the Dynamics Functions:
SC LINK [1]
20 Software V4.0
Touch the green Vistonics
This view is the same as with mono or stereo channels with one exception,
refer to the screenshot below. Please note that the dynamics settings ap-
plied here will be valid for all surround signal legs except the LFE.
If such a setting has been made, the default Vistonics
shows in small characters which signal leg is different from the others (in
this case, only "Lf" is shown since the LFE's EQ setting is not modified),
as shown left.
If one or more of the signal legs must be adjusted differently from others –
such as adding expansion in the center channel only, the CHANNEL VIEW
has to be selected. Then all the separate EQ and dynamics settings for
"Front", "Center", "LFE" and "Rear" are accessible. Please note that there
also is a gain reduction indication at the left of each of the four individual
dynamics icons.
The Side-Chain Link function allows forming a side-chain group from up
to eight channels in order to control the dynamics of all of them by the
maximum level of all side-chain group members. Side-chains are defined
in the GC's Channel Patch window ("Sidechain Link Setup", tick "Enable
side Chain Link"). The rotary encoder selects the surround signal legs used
for the side-chain group; for details, see the block diagram below.
SW V4.0
TM
dynamics field.
TM
dynamics display
Date printed: 17.06.08