Channel View - Studer Vista 5 M2 Operating Instructions Manual

Digital mixing system, sw v4.5

Hide thumbs Also See for Vista 5 M2:

Table of Contents

Channel View

Date printed: 17.06.08

Pressing VIEW: CHANNEL brings up an overview of the channel, covering

the whole Vistonics TFT. All available parameters are shown in the rotary

section, except for dynamics, EQ, and panning

visible parameters are available for adjustment.

As can be seen above, there is an additional selection possibility in the

touch area that allows modifying the EQ and dynamics parameters for the

Front, Center, LFE and Rear signals individually.

Upon touching one of these fields (e.g. the red "Center" EQ field) the dis-

play changes to the individual EQ setting of the "Inp x 1" 5.1 input's center

The display changes then as shown on the next page.

Vista Digital Mixing System

(see chapter

A.4.5). Only

Software V4.0 25

Table of Contents