Scan Operation - Sanyo FXD-RR1 Operating Instructions Manual

ATP (AUTO TRAVEL PRESET) OPERATION ................................... 1
The Auto Travel Preset function searches for and memorizes the 6 strong stations in one of the two bands
(FM T, AM T) in order of signal strength.
This feature is useful when you are driving in an unfamiliar location and want to memorize local stations
without changing the standard preset stations.
A total of 12 stations (6 FM and 6 AM) can be programmed.
• To set the stations
Select the desired band. Press and hold the BAND ATP button 1 for more than 2 seconds.
• Quick tuning of ATP stations
Select the desired band, then press one of the 6 preset buttons 3.
Note
This function is available for FM T and AM T.

SCAN OPERATION ............................................................................ 4

1.
Press the BAND ATP button 1 to select the desired band.
2.
Press the SC/PS button 4. The system will select and receive each receivable station for 10 seconds.
3.
To stop scanning and retain the station currently selected, press the SCAN button 4 again.
PRESET SCAN OPERATION .............................................................. 4
This function scans each of the preset stations stored in the selected band (both manual preset and auto
travel presets).
1.
Press the BAND ATP button 1 to select the desired band.
2.
Press the SC/PS button 4 for more than 2 seconds. The system will select and receive each receivable
preset station for 10 seconds.
3.
To stop scanning and retain the station currently selected, press the SC/PS button 4 again.
GB–15