Sanyo FXD-680GD Operating Instructions Manual
Sanyo FXD-680GD Operating Instructions Manual

Sanyo FXD-680GD Operating Instructions Manual

Full panel detachable high power fm/mw/lw stereo receiver compact disc player iso mounting with removable trim ring remote control ready
Hide thumbs Also See for FXD-680GD:

Advertisement

FXD-680GD
FM/MW/LW CD RECEIVER
45W x 4
CD-R&RW
SEL
Full Panel Detachable
High Power FM/MW/LW Stereo Receiver
Compact Disc Player
ISO Mounting with Removable Trim Ring
Remote Control Ready
(English)
OPERATING INSTRUCTIONS................ 2~19
1

Advertisement

Table of Contents
loading

Summary of Contents for Sanyo FXD-680GD

  • Page 1 FXD-680GD FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW Full Panel Detachable High Power FM/MW/LW Stereo Receiver Compact Disc Player ISO Mounting with Removable Trim Ring Remote Control Ready (English) OPERATING INSTRUCTIONS……………. 2~19...
  • Page 2: Table Of Contents

    If servicing is required, return the unit to an authorized SANYO mobile audio dealer. • Use the Controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. • Changes or modifications not expressly approved by SANYO may void the user’s authority to operate this equipment.
  • Page 3: Compact Disc Care

    COMPACT DISC CARE Dirt, dust, scratches and warpage can cause a deterioration in the sound or intermittent skipping some tracks during play. • This unit has been designed to play compact discs bearing the identification logo shown on the left. No other discs can be played. ReWritable TEXT •...
  • Page 4: Digital Display

    DIGITAL DISPLAY Radio Frequency, Time, CD Track Number, Audio Control Selected Mode SOUND CLASSIC POP Loud ROCK FM Stereo CD running indicator Mono Disc IN Local...
  • Page 5: Detachable Front Panel

    DETACHABLE FRONT PANEL The front panel is designed to be removable for antitheft purposes. It is recommended that you remove and carry the front panel with you when you leave your car. HOW TO ATTACH THE FRONT PANEL Align the right side of the panel (A) with the stopper (B), and then push the left side of the panel into the unit until it clicks.
  • Page 6: General Operation

    GENERAL OPERATION FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW TURNING THE POWER ON......Any button Install the front panel and press any button (except REL and EJECT button) when ACC is on. TURNING THE POWER OFF .............…..1 When system is on, press the POWER button 1 to turn off the unit. VOLUME LEVEL CONTROL........2 Rotate the VOL dial 2 to adjust the volume level.
  • Page 7 LOUDNESS EFFECT........……..…..6 Press BAND/LOUD button 6 for several seconds to reinforce the bass output. Press it for several seconds again to release this function. EQUALIZATION......……....…………..7 Press SOUND button 7 to turn on equalization function and to select desired audio mode. There are five kinds of mode as below: FLAT CLASSICS...
  • Page 8: Radio Operation

    RADIO OPERATION FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW SWITCHING TO RADIO MODE…………………….…1 Press SOURCE button 1 to select radio mode, the radio mode appears in the display together with the memory band and frequency. SELECTING THE FREQUENCY BAND……………..2 At radio mode, press BAND/LOUD button 2 shortly to select the desired band. The reception band will change in the following order: RADIO TUNING…………………………………………3 Press the TUN/TRK...
  • Page 9 • Programming stations ..1. Select the desired band, then tune in the station you want to store in memory. 2. Press and hold one of the preset buttons 5 for more than 2 seconds until the corresponding preset button number appears. Repeat steps 1.
  • Page 10: Cd Operation

    CD OPERATION FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW LOADING AND EJECTING THE CD………………1,8 Insert a disc into the CD slot 1 and the CD player will start. The system remains in CD mode and “ ” appears in the display. Press the eject button 8 to eject a disc.
  • Page 11: Error Signs

    Notes • During playback of a CD, the CD running indicator spins. • The unit will turn-on automatically when a CD is inserted if the ignition switch is “ON”. REPEAT MODE ............6 Press the RPT button 6 to play the current track repeatedly. To cancel this mode, press the RPT button 6 again.
  • Page 12: Aux Mode Operation

    AUX MODE OPERATION FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW SWITCHING TO AUX MODE........1 The unit has a pair of auxiliary input terminals (see WIRING figure on page 18). This allows you to listen to an auxiliary audio source (MP3, portable cassette player, etc). Press the SOURCE button 1 with the power on to switch from radio mode or CD mode to AUX mode.
  • Page 13: Remote Control (Optional)

    REMOTE CONTROL (OPTIONAL) POWER TUN/TRK LOUD 1.POWER 9. BAND/LOUD 2. AUDIO 10.PAU 3. VOL 11.SCN 4. VOL 12.RPT 5. SOURCE 13.SHF 6. TUN/TRK 14.SOUND 15.1~6 Preset buttons 7. TUN/TRK 8. P.SCAN/AST REMOTE SENSOR……..…………………..….…..IR Point the remote control handset to the remote sensor IR. Press the function keys on the handset to control the system.
  • Page 14: Hints For Proper And Safe Operation

    10 seconds, the player will reload the disc to prevent damage. • Servicing Should a problem develop, do not open the unit or try to repair it yourself. If servicing is required, bring the unit to a Sanyo Authorized Service Center.
  • Page 15: Trouble Shooting

    TROUBLE SHOOTING Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with the unit. Before having the unit serviced, refer to the troubleshooting chart below. Symptom Cause Solution Turn up the volume control. The compact disc The volume control is turned down.
  • Page 16: Accessories And Hardware

    ACCESSORIES AND HARDWARE INSTALLATION Mounting Bracket Mounting Strap Locking Screw (Half Sleeve) X1 and Screw X4 Unlock Levers Removable Trim Ring Carrying Case INSTALLATION 1. BEFORE INSTALLATION When mounting the unit in a car, keep the unit as level as possible. If the unit must be mounted at an angle, due to the design of the vehicle, make sure the unit does not tilt by more than 30...
  • Page 17: Unit Removal

    2. INSTALLATION PROCEDURES When mounting the unit into a DIN–standard cutout (182x53 mm) in the dashboard or console, attach the provided Removable Trim Ring to the unit. 1. Insert the mounting bracket into the DIN-standard cutout (182x53 mm) in the dashboard or console.
  • Page 18: Electrical Connections

    ELECTRICAL CONNECTIONS WIRING Rch Red Lch White AUX IN Cable (Black) Rch Red Lch White LINE OUT Cable (Gray) Part C N.C. N.C. N.C. Part B FUSE (15A) Part A Antenna Socket 4-SPEAKER SYSTEM 2-SPEAKER SYSTEM (GREEN/BLACK) (GREEN/BLACK) Rear Left Rear Left (GREEN) Speaker...
  • Page 19: Line Out Connections

    AUXILIARY INPUT CONNECTIONS The unit has a pair of auxiliary input terminals. You can connect a portable audio player through the terminals of the AUX IN cable (see WIRING figure above). SANYO Electric Co., Ltd. Printed in China Issue date 09/03...

Table of Contents