Storing The Station Names/Aux Title - Sanyo FXD-RR1 Operating Instructions Manual

STORING THE STATION NAMES/AUX TITLE

You can assign a name to each radio station and store it in memory. As much as 30 station names can be
stored composed with 11 characters each.
4
STORING THE STATION NAMES ............................................ 1,3,4,5
1.
Tune in a station whose name you want to store.
2.
Press the MENU button 1 for more than 2 seconds.
The " Name edit " will light then the "_ _ _ _ _ _ _ _ _ _ _" on the display window. The first " _ " flashes.
STORING THE AUX TITLE .................................................... 2,1,3,4,5
1.
Press the CD button 2 to select the AUX mode.
2.
Press the MENU button 1 for more than 2 seconds.
The " Name edit " will light then the "_ _ _ _ _ _ _ _ _ _ _" on the display window. The first " _ " flashes.
3.
Enter the characters.
A. Rotate the VOLUME dial 3 in a clockwise direction to select the desired characters.
( A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x
y z 0 1 2 3 4 5 6 7 8 9
B. Press the TUN/TRK
C. Repeat steps A. and B. to complete entering the entire name.
4.
Press the PWR MUTE button 5 to store the station name. The station name flashes.
5.
To return to the previous indication, Press the MENU button 1.
Note
• If you try to store more than 30 station names, " **FULL** " will be displayed.
• If you make no button input or dial operation in 30 seconds, the message edit
will turn off automatically.
• When entering a name, pressing the following buttons affects the display of
characters as follows.
: Changes to inputting letters. (Starts with " A " or change of a capital letter and a small
letter.)
: Changes to inputting numbers. (Starts with " 0 ".)
: Changes to inputting characters. (Starts with " < ".)
: Enters a space (blank).
2
or button 4 to move the flashing cursor.
GB–16
3 5
1
)