Adjusting Sound And Display; Adjusting The Sound Characteristics - Sanyo Fxd-Rr1 Operating Instructions Manual

ADJUSTING SOUND AND DISPLAY

ADJUSTING THE SOUND
CHARACTERISTICS ..............................................1,2
1.
Each time you press the AUDIO button 1 to select the desired adjustment mode as table below.
2.
Rotate the VOLUME dial 2 to adjust the selected item. Use the following tables as a guide for adjusting
the settings in each mode. Adjust within 5 seconds after selecting the item. After 5 seconds, the unit
returns to previous indication.
Adjustment item
EQ disp *
BAS 0 (BASS)
TRE 0 (TREBLE)
LOUD (LOUDNESS)
BAL (BALANCE)
FAD (FADER)
Aux Gain
Lim vol
Mute Lev
• EQ disp *
Displays the current setting of equalizer curve, if the equalizer has been set.
(See page 10 " ADJUSTING EQUALIZER AND SOUND STAGE")
• Aux Gain
Adjust the input volume of the external equipment.
It is displayed only AUX mode.
• Lim vol (Limit volume)
Adjust the volume at the time of power on. You can adjust with the actual sound.
• Mute Lev (Mute level)
You can adjust the mute level with the actual sound.
4
Adjustment Range
(Equalizer will be displayed if set up )
BAS –5 ~
TRE –5 ~
Loud off
BAL L 9 (Full left)
FAD R 9 (Full left)
– 6 ~
0 ~
0 ~
1
BAS 0 ~ BAS +5
TRE 0
~ TRE +5
– Loud on
BAL 0 BAL R 9 (Full right)
FAD 0
FAD F 9 (Full right)
0 ~
25 ~
10 ~
A italicized letter is an initial value.
GB–6
2
3
+3
40
40