General Operation - Sanyo FXD-680GD Operating Instructions Manual

GENERAL OPERATION

2
1
TURNING THE POWER ON........................Any button
Install the front panel and press any button (except REL and EJECT button) when ACC is on.
TURNING THE POWER OFF .............................................................. 1
When system is on, press the POWER button 1 to turn off the unit.
VOLUME LEVEL CONTROL.......................................2
Rotate the VOL dial 2 to adjust the volume level.
ADJUSTING THE SOUND
CHARACTERISTICS ..............................................2, 3
Press the AUDIO button 3:
1. Each time you press the AUDIO button 3, the item changes as follows;
VOL
(Volume)
2. Rotate the VOL dial 2 to adjust the selected item. Make the adjustment within 5 seconds after
selecting. After 5 seconds, the display window will revert to display priority.
BASS (BAS 00)
TREBLE (TRB 00)
BALANCE (BAL L=R)
FADER (FAD F=R)
MODE SELECTION...................................................4
Press SOURCE button 4 to choose desired listening mode. (e.g. radio mode to CD mode.)
SET THE CLOCK..............................................5,8,9
Press the DISP button 5, the clock is shown on the LCD display. Then hold down the button until
the clock flashes. Then press the TUN/TRK
9 to change minutes.
3 7
BAS TRB
(Bass) (Treble) (Balance) (Fader)
Adjustment Range
BAS –10
TRB –10
10L
10F
FM/MW/LW CD RECEIVER 45W x 4
BAL FAD
BAS 10
TRB 10
10R
10R
button 8 to change hours or TUN/TRK
6
6 8
CD-R&RW
4 9
5
button