Sanyo FXD-RR1 Operating Instructions Manual page 10

LOCAL/DISTANT (LO/DX) SELECTION ........................................... 4
This feature is used to select the strength of the signals at which the radio will stop during Automatic
Tuning. Press the BAS-X LO/DX button 4 for more than 2 seconds to select the Local (LO) setting and only
the strongest (local) stations will be received. The " lo " indicator appears in the display window.
Pressing again for 2 seconds will select the Distant setting and the radio will stop at a wider range of
signals, including weaker more distant stations. The " lo " indicator will go out on the display window.
ENHANCING THE BASS SOUND (BAS-X) ....................................... 4
Press the BAS-X LO/DX button 4 to display the BAS-X INDICATOR "
Each time you press the BAS-X LO/DX button 4, current mode appears on the display window and the
mode change as follows.
(No display)
BAS-X 0 (No BAS-X enhanced)
BAS-X 1 (Enhanced BASS level : Low)
BX
BAS-X 2 (Enhanced BASS level : Middle)
BX
BAS-X 3 (Enhanced BASS level : High)
BX
BAS-X 4 (Enhanced BASS level : Very High)
BX
Note
Settings for BASS, TREBLE, LOUDNESS and BAS-X can be made to each of
the following modes independently: FM, AM, CD and AUX.
BX
GB–9
" on the display window.