Replacing The Fuse; Line Out Connections; Unit Removal - Sanyo FXD-RR1 Operating Instructions Manual

REPLACING THE FUSE

When fuse replacement is necessary remove the blown fuse by using pliers. Then install the new 10 amp.
fuse.

LINE OUT CONNECTIONS

RCA Line- out Jacks (For Rear Speakers)
• The unit has a line out terminals. You can use a separate rear channel amplifier to upgrade your system.
• Connect a patch cable (not supplied) from the White (left rear channel) and Red (right rear channel) RCA
line output jacks to the line input terminals of the external amplifier.

UNIT REMOVAL

1.
Insert the unlock levers into the slots on each side of the unit until they click into place.
2.
Pull the levers to remove the unit.
Notes
• Handle the unlock levers carefully to avoid injuring your fingers.
• Keep the unlock levers in a safe place for future use.
GB–25