With cd changer control full panel detachable high power fm/am stereo receiver compact disc player with cd changer controller iso mounting with removable trim ring (26 pages)
Full panel detachable
fm stereo/mw receiver
compact disc/mp3-cd player
with cd changer controller
with remote controller
iso mounting with removable trim ring (35 pages)
Page 1
FXD-685GD FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW Full Panel Detachable High Power FM/MW/LW Stereo Receiver Compact Disc Player ISO Mounting with Removable Trim Ring CD Changer Control Remote control (English) OPERATING INSTRUCTIONS……………. 2~21...
If servicing is required, return the unit to an authorized SANYO mobile audio dealer. • Use the Controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. • Changes or modifications not expressly approved by SANYO may void the user’s authority to operate this equipment.
COMPACT DISC CARE Dirt, dust, scratches and warpage can cause a deterioration in the sound or intermittent skipping some tracks during play. • This unit has been designed to play compact discs bearing the identification logo shown on the left. No other discs can be played. ReWritable TEXT •...
DIGITAL DISPLAY Radio Frequency, Time, CD Track Number, Audio Control Selected Mode SOUND CLASSIC POP Loud ROCK FM Stereo CD running indicator Mono Disc IN Local...
DETACHABLE FRONT PANEL The front panel is designed to be removable for antitheft purposes. It is recommended that you remove and carry the front panel with you when you leave your car. HOW TO ATTACH THE FRONT PANEL Align the right side of the panel (A) with the stopper (B), and then push the left side of the panel into the unit until it clicks.
GENERAL OPERATION FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW TURNING THE POWER ON......Any button Install the front panel and press any button (except REL and EJECT button) when ACC is on. TURNING THE POWER OFF ......…..1 When system is on, press the POWER button 1 to turn off the unit. VOLUME LEVEL CONTROL........2 Rotate the VOL dial 2 to adjust the volume level.
Page 7
LOUDNESS EFFECT........……..…..6 Press BAND/LOUD button 6 for several seconds to reinforce the bass output. Press it for several seconds again to release this function. EQUALIZATION......……....…………..7 Press SOUND button 7 to turn on equalization function and to select desired audio mode. There are five kinds of mode as below: FLAT CLASSICS...
RADIO OPERATION FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW SWITCHING TO RADIO MODE…………………….…1 Press SOURCE button 1 to select radio mode, the radio mode appears in the display together with the memory band and frequency. SELECTING THE FREQUENCY BAND……………..2 At radio mode, press BAND/LOUD button 2 shortly to select the desired band. The reception band will change in the following order: RADIO TUNING…………………………………………3 Press the TUN/TRK...
Page 9
• Programming stations ..1. Select the desired band, then tune in the station you want to store in memory. 2. Press and hold one of the preset buttons 5 for more than 2 seconds until the corresponding preset button number appears. •...
CD OPERATION FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW LOADING AND EJECTING THE CD………………1,8 Insert a disc into the CD slot 1 and the CD player will start. The system remains in CD mode and “ ” appears in the display. Press the eject button 8 to eject a disc.
Notes • During playback of a CD, the CD running indicator spins. • The unit will turn-on automatically when a CD is inserted if the ignition switch is “ON”. REPEAT MODE ............6 Press the RPT button 6 to play the current track repeatedly. To cancel this mode, press the RPT button 6 again.
CD CHANGER OPERATION FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW SWITCHING TO CD MODE........1 Press the SOURCE button 1 with the power on to select CDC mode. When the CDC mode is switched on, playback begins with the first CD that the CD changer detects.
To cancel the track shuffle or disc shuffle mode, press the SHF button 6 again. SELECTING A DISC..........7,8 Press the DISC – button 7 to select the preceding disc. Press the DISC + button 8 to select the next disc. Note • Use with only SANYO CD Changer.
REMOTE CONTROL POWER TUN/TRK LOUD DISC 1.POWER 10.PAU 2. AUDIO 11.SCN 3. VOL 12.RPT 4. VOL 13.SHF 5. SOURCE 14.SOUND 6. TUN/TRK 15.1~6 Preset buttons 16. DISC- 7. TUN/TRK 8. P.SCAN/AST 17. DISC+ 9. BAND/LOUD REMOTE SENSOR……..…………………..….…..IR Point the remote control handset to the remote sensor IR. Press the function keys on the handset to control the system.
ERROR SIGNS If a problem should occur while operating the CD player, one of the following error signs may be displayed. Refer to the table below to identify the problem. DISPLAY DESCRIPTION ERROR 1 MECHANISM ERROR ERROR 2 SERVO ERROR If a problem should occur while operating the CD CHANGER player, one of the following error signs may be displayed.
10 seconds, the player will reload the disc to prevent damage. • Servicing Should a problem develop, do not open the unit or try to repair it yourself. If servicing is required, bring the unit to a Sanyo Authorized Service Center.
TROUBLE SHOOTING Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with the unit. Before having the unit serviced, refer to the troubleshooting chart below. Symptom Cause Solution Turn up the volume control. The compact disc The volume control is turned down.
ACCESSORIES AND HARDWARE INSTALLATION Mounting Bracket Mounting Strap Locking Screw (Half Sleeve) X1 and Screw X4 Unlock Levers Removable Trim Ring Carrying Case INSTALLATION 1. BEFORE INSTALLATION When mounting the unit in a car, keep the unit as level as possible. If the unit must be mounted at an angle, due to the design of the vehicle, make sure the unit does not tilt by more than 30...
2. INSTALLATION PROCEDURES When mounting the unit into a DIN–standard cutout (182x53 mm) in the dashboard or console, attach the provided Removable Trim Ring to the unit. 1. Insert the mounting bracket into the DIN-standard cutout (182x53 mm) in the dashboard or console.
ELECTRICAL CONNECTIONS WIRING Rch Red (Brown) Lch White CD CHANGER SOCKET FRONT LINE OUT Cable Rch Red (Gray) Lch White REAR LINE OUT Cable Part C N.C. N.C. Part B FUSE (15A) Part A Antenna Socket 4-SPEAKER SYSTEM 2-SPEAKER SYSTEM (GREEN/BLACK) (GREEN/BLACK) Rear Left...
RCA Line- out Jacks • Connect a patch cable (not supplied) from the White (left channel) and Red (right channel) RCA line output jacks to the line input terminals of the external amplifier. SANYO Electric Co., Ltd. Printed in China Issue date 09/03...