7-96
Installing Optional Remote Peripherals
Installing a Remote Customer Display
The Standard Remote Mount (5964-K031) is used to mount the following NCR displays.
• NCR RealPOS 5943 12.1-Inch Monitor
• NCR RealPOS 5943 15-Inch Monitor
• NCR RealPOS 5967 12.1-Inch Touch Monitor
• NCR RealPOS 5967 15-Inch Touch Monitor
The displays are installed on the mount in a similar fashion. Only the 5964 is shown. See
the following sections for cable connections to the host terminal.
1. Install the mount onto the back of the Operator Display (4 screws).