Nvram Data Upload/Download; Nvram Data Download (Sp5-825) - Ricoh K-C1 Service Manual

20 February, 2001

5.1.10 NVRAM DATA UPLOAD/DOWNLOAD

The "memory all clear" procedure will reset all NVRAM settings back to their
defaults. It is therefore necessary to upload the NVRAM data before starting the
clear, and then to download the data back after completing the clear.
• SP5-824: Upload from the BiCU to a flash memory card.
• SP5-825: Download from a flash memory card to the BiCU.

NVRAM Data Download (SP5-825)

[A]
NOTE: This procedure downloads all the settings stored in the NVRAM, except the
following values.
• Electrical total counter values (SP7-003)
• Machine serial number (SP5-811, SP5-920, SP5-925)
• Plug & Play brand name and production name setting (SP5-907)
• Some SBU settings (SP4-904-6, SP4-904-7, SP4-905-6, SP4-905-7, SP4-
906-3, SP4-907-3)
• Language UK/TW Priority (SP5-916) – Asia and Taiwan versions only
NOTE: Be sure to turn off the main switch before inserting or removing the flash
memory. Installing or removing flash memory while the switch is still on
may result in damage to the BiCU or to the memory.
1. Turn off the main switch.
2. Remove the rear middle cover [A] (1 screw).
3. Insert the flash memory card [B] into the card slot.
NOTE: Make sure that the printed "A" on the card is facing the outside of the
machine.
4. Turn on the main switch.
5. Access SP mode 5-825.
USING SERVICE PROGRAM MODES
[B]
B039M934.WMF
5-43
B039M935.WMF