Gas Connection - Rinnai Symmetry RDV3610 Installation Manual

Gas connection

The gas connection from the control valve is a ½ " BSP male flare fitting. This connects straight
into the gas control on the lower left hand side of the appliance.
Gas pipe sizing must consider the gas input to this appliance as well as all other gas appliances
in the premises.
190
Connection Access
Rinnai New Zealand Limited
Flared Union
Gas Control
C L
440
To access the gas connection remove the upper and
lower bracket (also called the service access panels).
The brackets can be removed by undoing the screws
shown below at each end.
RDV3610 Installation Manual: 11658-E
22
05-10