Replacing The Print Head - SATO M-5900RV Operator And Technical Reference Manual

Section 3. Adjustments and Maintenance

Replacing the Print Head

RAISE THE
PRINTER SIDE
DOOR
REMOVE THE
GREEN PLASTIC
Hold down on the front edge of the print
LEVER GUARD
head assembly while pulling forward on
plastic lever marked "PULL"
REMOVE ONLY THE
MIDDLE SCREW
PRINT HEAD
TEAR BAR
PRINT HEAD AND TEAR
BAR WILL SEPARATE
PN 9001081
SATO M-5900RV Operator and Technical Reference Manual Page 3-7
Rev. C