Format/Field Store - SATO M-5900RV Operator And Technical Reference Manual

Section 4. Programming Reference
This command requires the Memory Card option.
Command Structure
<ESC>YS,aa<ESC>/N,bb,cc{.......}
aa =
bb =
cc =
{.....}=
Example:
Placement:
Default:
Command Function
To store a format field description in the memory card.
Printer Input
<ESC>A
<ESC>CC1
<ESC>YS,02<ESC>/N,01,13<ESC>V0100<ESC>H0100<ESC>XB1
<ESC>/N,02,13<ESC>V0200<ESC>H0200<ESC>XB1
<ESC> Z
Printer Output
There is no printer output for this command. See <ESC>YR Format/Field
Recall command.
Special Notes
1. This command requires the Memory Card option. See your SATO
representative for details.
2. Each job should be sent individually. If more than one job is sent in a
data stream, only the first one will be accepted and the remainder
ignored.
3. The following commands cannot be stored in a format:
<ESC>CS
<ESC>NULL Cut Label
<ESC>/D
<ESC>T
<ESC>@
<ESC>BJ
<ESC>G
<ESC>BT
<ESC>0
Page 4-88
Memory Card Function

Format/Field Store

Format number to be stored (01-99)
Field number to be stored (01-99)
Length of field to be stored (01-99)
Command stream describing the field to be stored.
<ESC>YS,01<ESC>/N,01,05
Immediately after <ESC>CC Slot Select command.
None
Print Speed
Recall Field
Custom Characters
Off Line
TrueType Fonts
Store Custom Graphics
Variable Ratio Bar Codes <ESC>PI
Partial Edit
SATO M-5900RV Operator and Technical Reference Manual
<ESC>C Repeat Label
<ESC>Q Print Quantity
<ESC>EX Expanded Label Storage
<ESC>& Store Form Overlay
<ESC>#E Print Darkness
<ESC>ID Store Job ID
<ESC>* Clear Memory & Buffer
Store PCX Graphics
PN 9001081
Rev. C