Status - SATO M-5900RV Operator And Technical Reference Manual

Section 4. Programming Reference
This command requires the Memory Card option.
Command Structure
<ESC>BJS
Example:
Placement:
Default:
Command Function
Causes the printer to print the card status
Printer Input
<ESC>A
<ESC>CC1<ESC>BJS
<ESC> Z
Printer Output
Special Notes
1. This command requires the Memory Card option. See your SATO
representative for details.
2. The following information is provided ont the status label:
Line 1: Memory size of the card in Kbytes
Line 2: The ID number assigned with the <ESC>BJF command
Line 3: Number of fomats stored and bytes used
Line 4: Number of graphics stored and bytes used
Line 5: Number of PCX files and bytes used
Line 6: Number of TT fonts stored and bytes used
Line 7: Remaining free memeory
Line 8: Max expandable print length using the card
Line 9: Battery check results
Page 4-96
Memory Card Function
<ESC>BJS
After the <ESC>CC Slot Select command.
None
MEMORY CARD
Print buffer expansion 1024 Kbyte
ID Number
0 bytes for
0 bytes for
0 bytes for
0 bytes for
1048320 bytes free
Expandable print length 9999 dots
Battery Check OK
SATO M-5900RV Operator and Technical Reference Manual

Status

Slot [1]
UNIMCARD
0 formats
are used
0 graphic
are used
0 PCX
are used
0 TT fonts
are used
49.2 inches
PN 9001081
Rev. C