Page 23
Industrial Bar Code Printers Firmware Factory Reset Procedure SATO M5900 This setting clears all counters and resets printer to factory defaults. STEP PROCEDURE Set the printer power switch to the OFF position. Load labels on the printer. WARNING: This test activates all the heating elements on the print head and therefore must be performed with a label that is at least 4.4...
Page 24
Industrial Bar Code Printers Firmware Factory Reset Procedure SATO M5900 Linerless This setting clears all counters and resets printer to factory defaults. Eye-Mark (black sensor bar) labels must be installed in the printer with the black mark side facing down (non-marking side). It can not be performed with linerless label stock.
Need help?
Do you have a question about the M-5900 and is the answer not in the manual?
Questions and answers