SATO M-5900RV Operator And Technical Reference Manual page 3

M-5900RV Operator and Technical Reference Manual
The M-5900RV Operator and Technical Reference Manual contains basic
information about the printer such as setup, installation, cleaning and
maintenance. It also contains complete instructions on how to use the operator
panel to configure the printer. The following is a brief description of each
section in this manual.
Section 1. Printer Overview
This section
features.
Section 2. Installation and Configuration
This section
load the labels, and how to use the operator panel to configure the printer.
Section 3. Adjustments and Maintenance
This section contains instruction on how to maintain and adjust the
printer
Section 4. Programming Reference
This section
the commands that are used with the printer to produce labels with bar codes,
alphanumeric data and graphics.
Section 5. Interface Specifications
This section contains the printer’s interface specifications, which include
detailed information on how to properly interface your printer to the host
system.
Section 6. Troubleshooting
This section
have printer problems.
Appendices
Appendix A:
Appendix B:
Appendix C:
Appendix D:
Appendix E:
PN 9001081
Rev. C
SATO M-5900RV Operator and Technical Reference Manual
Preface
contains a discussion of the printer specifications and optional
contains instructions on how to unpack and set up the printer,
.
introduces the SATO Printer Programming Language. It contains
contains troubleshooting procedures to follow in the event you
Command Code Quick Reference
Bar Code Specifications
Custom Characters and Graphics
Optional Features
Custom Protocol
i